Replacement Hardware

This product listing was created so that you can replace lost or missing hardware from your holster or add spare hardware to your purchase.

If you have lost the retention screws from a holster without a modwing, you will need (2) 3/8" screws.

If you have lost the retention screws from a holster with a modwing, you will need (2) 5/8" screws.

If you want to remove your modwing from one of our standard holsters, you will need (2) 3/8 screws, (2) 1/4" rubber spacers, and (2) 1/4" posts

If you lost your Modwing Insert screw and nut and need to replace them, you need (1) 1/2" 8-32 Screw & (1) Nut

If you lost the hardware for the Monoblock, you will need (2) 1/4" Screws (2) 1/8" Hard Spacers (2) 3/16" Posts

You will need a standard Modwing for pistol-only holsters. If you have a light-bearing holster, you need to purchase a light-bearing Modwing. Both Modwings will include all hardware needed for installation and both wing inserts. Installation instructions can be found here.

Make sure to get a small tube of thread locker to use when replacing lost hardware or be sure to use some removable thread locker that you already have. 

Please reach out to us through the Contact Us section of the website so we can help determine what hardware you need before ordering if you are unsure of what to order. 

If you have already spoken to us, please make sure to include the details of our discussion for your order in the notes section at checkout. 

See all our Accessories, tools, etc. here:

4Bros Four Brothers Accessories

Please review our Four Brothers Holsters Exchange, Return and Refund Policy

Made in America. Founded, located, engineered, manufactured, and shipped from Northern Indiana.