Your cart

Accessories

Our minimalist flashlight holster is compatible with the Modlight PLH-V2, OKW 18650, Streamlight Protac HL, Olight M2R, and Fenix PD35. It can accommodate a flashlight with a straight body of 1" diameter. Our kydex flashlight holder is designed to allow the user to adjust the amount of force needed to remove the light.

Sold
Out

1" Diameter Flashlight Holster — $25
Our 3D-printed AR-15 Rifle Wall Hanger is designed to allow the Armalite Rifle, or AR-15, to be mounted horizontally to any 2 x 4 stud with three 3/16" diameter by 3" long hex head wood screws. The hardware required to mount the hanger through a 1/2" sheet of drywall and a standard 2 x 4 is included with each Hanger.
4Bros AR-15 Rifle Wall Hanger — $20
Our 3D-printed Armorer & Gunsmith Universal Bench Block makes the removal of pins from firearms & devices simple, easy, and quick. With one flat section, two grooves, and three hole sizes this block will provide a solid surface to hold frames, receivers, and slides while tapping out pins and not marring the finish.
4Bros Armorer & Gunsmith Bench Block — $15
4Bros Can Cooler
4Bros Can Cooler — $5
Our dip can (or chew can) holster is designed to ride on your belt and hold your favorite adult lip candy securely. Our Dip Can Holster is manufactured with adjustable retention and is confirmed to fit Grizzly, Skoal, Kodiak and Copenhagen chew cans. We are confident that other cans will fit as well.
4Bros Dip Can Holster — $35
For the best place to dump your every day carry items, look no further than Four Brothers. Our EDC Kydex Tray is perfect for your everyday pocket dump. The center target portion of the tray makes it easy to get flat items like coins out of the tray. Formed from .080 thick thermoplastic material. Proudly made in the USA

Sold
Out

4Bros EDC Tray — $20
Holster thigh straps help keep a low or mid-ride holster from pulling away from the body when drawing your pistol. Our strap works well with the Safariland UBL and Blade-Tech Duty Drop holster attachments. Proudly made in the USA and also proudly made in Indiana. Our 1 1/2" Strap is made of a Polypropylene webbing
4Bros Holster Thigh Strap — $12.99 +
Our 4Bros Keychain or Key Tag is a simple way to show your support while driving or carrying anything in a container with a zipper pull. Made with tight embroidery and displayed on both sides, our logo is sure to add some character and style to anything compatible with a keychain.
4Bros Key Chain — $5
The 4Bros M-Lok Angled Foregrip was designed by a local USPSA and Steel Challenge Grand Master shooter to provide greater rearward grip pressure while improving overall comfort. Using a curved grip allows the shooter to apply the force of a vertical grip with the comfort of an angled grip for greater control with splits and rapid transitions while shooting at high speed.
4Bros M-Lok Angled Foregrip — $19.99
Our goal in developing the third revision of our Molle Adapter was simple; offer a low cost, effective and solid mount to convert the old X26, X2 and Omnivore holsters, new Blade-Tech X26 and Taser 7, New Blackhawk Taser 7 Holster that uses 10-32 screws and most standard Blade-Tech bolt pattern holsters and carriers to a Load Bearing Vest with one common kit. We have achieved that by creating a user installed system that includes the common hardware needed for quick, simple installation.
4Bros Molle Adapter Revision 3 — $45
4Bros Phone Stand
4Bros Phone Stand — $5
Aluminum #8 Finish Washer

Sold
Out

Aluminum #8 Finish Washer — $0.33 +