
Safariland Taser 7 Molle Adapter Mounting Instructions
Share
Product Components:
(1) T7 Adapter Plate with (6) 1/8” threaded posts installed.
(1) 1/8" Allen Wrench
(2) 5/8" Flat Head Screws
(1) 1/2" Flat Head Screw
(6) 5/16" Flat Head Screws
(2) 5” Blade-Tech Molle Loks
Installation:
1. Remove belt attachment with 1/8" allen wrench retaining Safariland threaded posts for step 4.
2. Ensure 6 threaded posts are firmly installed into the T7 plate.
3. Align the T7 plate with the holster, blocking toward the holster.
4. Install 5/8" flat head screws and Safariland threaded posts into top 2 holes.
5. Install 1/2" flat head screw and Safariland threaded post into bottom hole.
6. Attach both Molle Loks to the plate with 6-5/16" flat head screws.
Video instructions can be found HERE
*To adjust the holster cant, you must remove the Molle Loks first. Adjust the cant by loosening the 5/8” and 1/2” flat head screws for plate mount, set to your cant angle preference and then retighten the screws. Reinstall
Molle Loks by following the procedure above.
Step 1: Remove belt attachment with a 1/8" Allen wrench, retaining Safariland threaded posts for step 4.

Step 2: Ensure 6 threaded posts are firmly installed into the T7 plate.

Step 3: Align the T7 plate with the holster, blocking toward the holster.

Step 4: Install 5/8" flat head screws and Safariland threaded posts into top 2 holes.
Step 5: Install 1/2" flat head screw and Safariland threaded post into bottom hole.

Step 6: Attach both Molle Loks to the plate with (6) 5/16" flat head screws.

*To adjust the holster cant, you must remove the Molle Loks first. Adjust the cant by loosening the 5/8” and1/2” flat
head screws for plate mount, set to your cant angle preference and then retighten the screws. Reinstall the Molle Loks by following the procedure above.