Your Satisfaction, Our Priority: At Four Brothers Inc., customer satisfaction is at...
🔧 Don't forget Thread Locker — $1.50
Keep your holster hardware secure against vibration and loosening
✓ Added to your order!
$0.00 USD
FOUR BROTHERS HOLSTERS
Couldn't load pickup availability
This Inside Waistband holster is designed for the Springfield Hellcat Pro and Streamlight TLR-7 X and TLR-7 A weapon-mounted light combination. Built for concealed carry, the holster provides adjustable retention, a full sweat guard, adjustable ride height and cant, and a streamlined profile designed to help reduce printing.
The holster retention indexes on the weapon-mounted light rather than the pistol. The Streamlight TLR-7 X or TLR-7 A must be installed on the firearm for the holster to function correctly.
This holster is designed to use the UNIV-1 Key when the Streamlight TLR-7 X or TLR-7 A is mounted on the Springfield Hellcat Pro. Other weapon-mounted lights will not fit correctly. The Streamlight TLR-7 Sub is not compatible with this holster.
This holster is designed to accommodate the Springfield Hellcat Pro equipped with the manual safety.
For technical specifications, review the Streamlight TLR-7 X technical data sheet.
Our preferred light option for this holster is the Streamlight TLR-7 X USB weapon-mounted light.
The Springfield Hellcat Pro and Streamlight TLR-7 X and TLR-7 A IWB holster is vacuum-formed using a precision-machined mold created from a CAD model of the firearm and weapon-light combination.
Each holster is formed, trimmed, and folded in-house. Final fit and function testing is performed using the actual Springfield Hellcat Pro and Streamlight TLR-7 X and TLR-7 A combination to verify proper fit and retention.
Retention is adjustable, allowing the holster to be configured to the user's preferred level of draw resistance.
Choosing the correct belt attachment can affect ride height, concealment, and how the holster interfaces with your belt. Review the Inside Waistband holster belt attachment guide for an explanation of the available configurations.
For setup information, review the Modwing installation instructions and video.
If the Modwing is removed, the required replacement components are available in the holster replacement hardware kit. The kit includes two 3/8-inch screws, two 1/4-inch rubber spacers, and two 1/4-inch threaded posts.
Complete your carry configuration with the Springfield Hellcat Pro IWB magazine carrier or the Springfield Hellcat Pro OWB magazine carrier.
Available color and finish choices can be reviewed in the Kydex holster color and finish guide.
We strongly recommend applying removable thread locker to each holster screw after receiving the holster. This helps reduce the risk of hardware loosening or loss during normal use. Periodically inspect all hardware and retention settings as part of routine holster maintenance.
This holster is designed for the Springfield Hellcat Pro and Streamlight TLR-7 X or the TLR-7 A combination. The weapon light must be mounted on the firearm to ensure proper retention.
No. Retention indexes on the weapon-mounted light, so the Springfield Hellcat Pro must have the Streamlight TLR-7 X or TLR-7 A installed for the holster to retain the firearm correctly.
Yes. This configuration is designed to use the UNIV-1 Key with the Streamlight TLR-7 X or TLR-7 A.
No. This holster is specifically designed for the Springfield Hellcat Pro and the Streamlight TLR-7 X or TLR-7 A combination. The TLR-7 Sub does not fit this holster.
Yes. This holster is designed to accommodate the Springfield Hellcat Pro equipped with the manual safety.
Yes. The holster profile is cut to accommodate most red dot sights.
Yes. Retention can be adjusted to change the amount of resistance during the draw and configure the holster to the user's preference.
The optional Modwing uses leverage against the inside of the belt to help move the grip of the firearm closer to the body and reduce printing. Two inserts are included to adjust the amount of leverage.
This holster is formed, trimmed, folded, and fit-tested in-house in the USA.
• Full Sweat Guard
• Adjustable Retention
• Adjustable Cant
• Profile cut to allow red dot sights
• Open Muzzle for threaded barrels and compensators
• Minimal material and smooth edges
• Made from .080" thermoplastic for durability.
• Optional Modwing includes 2 inserts to allow the user to adjust the amount of leverage placed against the inside of the belt to reduce firearm printing
• Proudly Made in the USA
Made in America. Founded, located, engineered, manufactured, and shipped from Northern Indiana.
Please review our Four Brothers Holsters Exchange, Return and Refund Policy
Please review our Four Brothers Holsters Terms of Service
Absolutely love this holster for my Hellcat!!!
It doesn't click in, but it fits snugly
Wish I could review the holster but the USPS keeps delaying the delivery date. You might want to use a more reliable delivery service UPS, FEDEX a pigeon would be more reliable!!!!
Utili-clip is a game changer!
You sold me, for life- 😎👍
Fits perfectly
Good fit. Wish they could incorporate a liner to protect the guns finish
Fits great, fast shipping,greatly,appreciated the advice on choices since I’ve been out of the game for twenty years. Will be used at a tactical range in a few weeks but the pistol fits well out of the box.
Best holster money can buy. hands down. quick shipping it was about a week wait but well worth it. i won’t be buying any other holsters.
