FOUR BROTHERS HOLSTERS
4Bros Safariland QLS Molle Adapter
4Bros Safariland QLS Molle Adapter
Couldn't load pickup availability
Description
Description
4BROS Safariland QLS MOLLE Adapter — 2-Row PALS Receiver Mount (6004-22)
Add a Safariland QLS Receiver (Model 6004-22) to your plate carrier, chest rig, or MOLLE vest—using only two rows of MOLLE/PALS. Our pre-assembled adapter creates a low-profile, rock-solid, no-cant mount that keeps your holster tight to the chest for confident retention and clean draws.
- Purpose-built for QLS 6004-22 (receiver plate only)
- 2-row MOLLE footprint for compact, stable mounting
- Pre-assembled for quick, simple installation
- No cant by design (vertical orientation)
- Tested 100+ lb pull strength* (see note below)
- Compatible with holsters using the Safariland QLS 19 Fork on the holster side
- Not for Blackhawk or Blade-Tech systems (see alternative mount below)
What’s in the box
1× 4BROS QLS MOLLE Adapter (pre-assembled)
Important links
Safariland QLS Receiver Model 6004-22 HERE
Blackhawk/Blade-Tech MOLLE solution HERE
Pull-strength note: Adapter plate strength was validated to over 100 lb of pull; actual failure occurred around ~300 lb (beyond our test rig’s validation range). Field conditions vary—inspect regularly.
Law Enforcement & Military Purchasing
We support departments with Net 15-day terms (check only). Purchase Orders must come from a department email, and the shipping address must match the department location. Bulk quotes are available—contact us for a formal quote and to initiate the order.
Threadlocker Guidance
After confirming fit/function, we strongly recommend applying Loctite VC-3 to all screws. Once cured, disassembly can be difficult—verify function first.
Terms & Conditions
By purchasing, you acknowledge responsibility for correct installation on your gear. 4BROS is not responsible for incorrect installation.
Key Specs (At-a-Glance)
Interface: Safariland QLS Receiver 6004-22 (pairs with QLS 19 fork)
Mounting: 2-row MOLLE/PALS vest, plate carrier, or chest rig
Orientation: Vertical only (no cant)
Assembly: Pre-assembled adapter + hardware
FAQ's
What receivers does this adapter support?
It’s designed exclusively for the Safariland QLS 6004-22 receiver. It pairs with a QLS 19 fork mounted to your holster.
Will this work with Blackhawk or Blade-Tech?
No. This adapter is not compatible with Blackhawk or Blade-Tech quick-detach systems. See our Blackhawk/Blade-Tech MOLLE option HERE
Does the adapter allow cant/angle adjustment?
No. This is a fixed, vertical mount. Cant is not supported.
How many MOLLE rows does it use?
Exactly two rows of MOLLE/PALS to keep the holster tight to the chest and minimize flex.
What gear can I mount it on?
Any carrier, vest, or chest rig with standard MOLLE/PALS spacing that provides two vertical rows.
Is it pre-assembled? How hard is the install?
Yes—pre-assembled for a quick and easy install.
What threadlocker should I use?
Use Loctite VC-3 after verifying the function. Once cured, the system is difficult to disassemble.
How strong is the adapter?
Lab pull testing exceeded 100 lb; failure ~300 lb in our tests. Always inspect your gear and follow departmental policies.
Do you offer LE/MIL terms or bulk quotes?
Yes—Net 15 (check) with department email + address match, and bulk quotes on request. Contact us to get started.
Shipping & Returns
Shipping & Returns
Please review our Four Brothers Holsters Exchange, Return and Refund Policy
Made in the USA
Made in the USA
Made in America. Founded, located, engineered, manufactured, and shipped from Northern Indiana.
Share









