Smith & Wesson M&P M2.0 5" IWB Holster with Streamlight TLR-1 HL
Designed for Smith & Wesson M&P M2.0 pistols with barrel lengths up to 5", this Inside Waistband (IWB) Holster is engineered for use with the Streamlight TLR-1, TLR-1 HL, and TLR-1 HP weapon lights. Precision-formed from durable .093" Kydex thermoplastic, it combines adjustable light-based retention with an optics-ready, concealment-focused profile for everyday carry.
Compatible Firearms
-
Smith & Wesson M&P M2.0 5" 9mm
Compatible with or without thumb safety.
Light-Bearing Retention
This holster uses a light-based retention system, locking securely onto the attached weapon light rather than the firearm frame. A compatible Streamlight TLR-1 series weapon light must be installed for proper holster fit and retention.
Compatible Weapon Lights:
- Streamlight TLR-1
- Streamlight TLR-1 HL
- Streamlight TLR-1 HP
Light Installation: This holster is designed and tested with the compatible Streamlight weapon lights installed using the 1913 rail key for proper alignment and fit.
Important Compatibility Note: This holster is not compatible with the Streamlight TLR-1 HL-X or TLR-1 HP-X.
Minor dimensional differences between older and newer TLR-1, TLR-1 HL, and TLR-1 HP light bodies may affect fit slightly. Retention is adjustable, allowing you to fine-tune the fit and draw to your preference.
Belt Attachment Options
We offer a selection of reliable IWB attachment options to fit different carry preferences, including the Discreet Carry Concepts Monoblock and UltiClip UltiTuck.
Explore our IWB belt attachment options to compare different configurations
Precision Fit & Construction
- Vacuum-formed using precision-machined molds developed from CAD models of the firearm and weapon-light combination.
- Each holster is formed, trimmed, folded, and hand-finished in-house.
- Final fit and retention are individually tested using the actual pistol and mounted weapon light.
- Adjustable retention hardware allows for personalized draw tension.
-
Constructed from durable .093" Kydex thermoplastic for consistent performance.
Features
- Full sweat guard for comfort and firearm protection
- Adjustable retention for personalized draw resistance
- Adjustable ride height and cant
- Slim profile with smooth edges to help reduce printing
- Optional ModWing with two interchangeable inserts helps rotate the grip toward the body for improved concealment
- Optics-ready profile cut to clear most red dot sights, provided the optic does not overhang either side of the slide
- Open-ended muzzle design accommodates threaded barrels and many compensator setups, depending on dimensions
- Available in right- and left-handed configurations
- Durable .093" Kydex thermoplastic construction
-
Personalize your setup with available holster colors and patterns
- Proudly made in the USA
Complete Your Carry Setup
A solid carry setup starts with the right belt.
Improve concealment and comfort with a wedge.
-
4Bros Holster Wedge — Helps angle the firearm grip closer to the body while reducing pressure points during concealed carry.
Give your extra magazine a home.
The following magazine carriers are intended for compatible 9mm and .40 S&W magazines.
Care & Maintenance
For long-term reliability, apply a removable thread locker to all hardware after initial setup to help prevent loosening during regular use.
See our Apply Thread Locker to Your Holster video for a quick application guide.
If you choose the optional ModWing and later want to remove it, you'll need our Replacement Hardware kit, which includes (2) 3/8" screws, (2) 1/4" rubber spacers, and (2) 1/4" threaded posts.
Frequently Asked Questions
Will this holster work without a weapon light installed?
No. This holster retains the mounted weapon light rather than the firearm. A compatible Streamlight TLR-1, TLR-1 HL, or TLR-1 HP must remain installed for proper retention.
Which Smith & Wesson M&P models are compatible?
This holster is designed for supported M&P M2.0 pistols with barrel lengths up to 5", including configurations chambered in 9mm, .40 S&W, 10mm, and .45 ACP. Fit has also been confirmed with the M&P M2.0 Metal using a compatible light.
Will this holster fit models with a thumb safety?
Yes. It accommodates compatible M&P M2.0 pistols with or without a thumb safety.
Will this holster work with the Streamlight TLR-1 HL-X or TLR-1 HP-X?
No. This holster is designed for the standard TLR-1 series listed above and is not compatible with the HL-X or HP-X.
Is this holster red dot compatible?
Yes. The profile is cut to clear most red dot sights, provided the optic does not overhang either side of the slide.
Can I adjust the retention and carry position?
Yes. Retention, ride height, and cant are adjustable.
Is this holster available for left-handed shooters?
Yes. This holster is available in both right- and left-handed configurations. Select your preferred configuration when ordering.
What material is used?
Each holster is constructed from durable .093" Kydex thermoplastic.
Where can I learn about my holster color & belt attachment options?
