P365/P365X/P365XL & TLR-7 Sub IWB Holster with Magazine Carrier Combo

This is our Right-Hand or Left-Hand combination package for customers looking for an Inside Waistband Holster designed to fit the Sig Sauer P365XL, P365X, and P365 handguns with the Streamlight TLR-7 Sub light mounted to the pistol and a P365XL Inside Waistband Magazine Carrier.  **Please note, the P365 magazine will sit deep in the carrier.** 

They come with a Modwing on the holster and either the Discreet Carry Concepts Monoblock or Ulticlip Ultituck belt attachment on both the holster and mag pouch.

Extra belt attachments can be added to your order here:

Replacement Belt Attachments 

Additional hardware can be added to your order here:

Four Brothers Replacement Hardware

Ulticlip options can be added to your order here:

UltiTuck

Several colors and patterns are available. Click here to see our blog article, which shows the material before and after being formed into a holster.

Holster details:

The holster retention is on the light itself, not the pistol, which means this holster will not work without the light mounted on the firearm.

You will need the Streamlight TLR-7 Sub or TLR-7 X Sub Sig version (part# 69401) mounted to the pistol for the correct fit with the #2 key.

This holster is compatible with the TLR-7 X Sub USB (part# 69406) and TLR-7 HL-X Sub (part# 69504) weapon-mounted light.

Information for the Streamlight TLR-7 X Sub can be found here.

Information for the Streamlight TLR-7 HL-X Sub can be found here.

Our preferred light option for this holster is the Streamlight TLR-7 HL-X Sub USB, which can be purchased from us HERE.

The holster WILL NOT WORK with any other version of the TLR-7 Sub light mounted on the pistol. 

Features:

• Open Muzzle for threaded barrels or compensators 
• Adjustable ride height and cant for the Monoblock and Ultituck belt attachments.
• Optional Modwing includes 2 inserts to allow the user to adjust the amount of leverage placed against the inside of the belt to reduce firearm printing. The location of the Modwing provides room for your fingers when drawing the pistol.
• Gussets on the front and back sides of the holster shell for increased strength and to eliminate cracking from daily use of the Modwing. We also changed the shape of the holster so that the front and back of the shell contact each other so the pressure from the Modwing is spread out equally between the two sides of the holster.
• A higher sight channel is needed to allow suppressor height sites.
• Lead-in at the top face of the holster to help with safe reholstering.
• Full Sweat guard, profile cut to clear red dot sights, especially models that may overhang the side of the slide.
• Smoother surfaces and rounded edges are aimed to improve comfort against your body and reduce hotspots.
• The holster's retention is easily adjusted so that the fit can be set to your personal preference.
• 100% compatible with the Phlster OS Engima.
• Made from .093" thick thermoplastic for durability
• Proudly Made in the USA

Magazine Carrier Details:

Our inside-the-waistband magazine pouch is designed around the P365XL magazine and is perfect for Appendix Carry or anywhere inside the waist with adjustable retention.  (See below for instructions). 

The smooth back and rounded edges help reduce hot spots and provide a flat, comfortable surface suitable for adding Moleskine or foam wedges (not included). 

The ambidextrous design allows you to carry the magazine bullets forward or back, depending on your preference, at any position inside the waistband.

The design of the carrier allows adjustability to the height and roughly 20 degrees of cant. 

Formed from .080" Thermoplastic for durability 

Made and assembled with pride in the USA

Magazine Retention Device allows for retention adjustment with a 1/8" Allen wrench. Retention adjustment instructions can be seen here:

Magazine Retention with the MRD

All of our Combo Packages can be found here:

Holster and Magazine Combination Packages 

Our Belt Attachment Blog Article explaining the different options can be found here:

4Bros Four Brothers Holsters Inside Waistband Attachments Explained

*We strongly suggest you apply a removable thread locker to each screw of your holster after you receive it to prevent lost screws while the holster is in use. 

Please review our Four Brothers Holsters Exchange, Return and Refund Policy

Made in America. Founded, located, engineered, manufactured, and shipped from Northern Indiana.