Icarus Precision A.C.E EVO & P365XL & TLR-7 Sub IWB Holster

P365 Icarus TLR-7 Sub 1913 IWB Holster

Note:  Icarus Precision supporting holsters are not returnable for anything other than quality or workmanship issues. They are specialty items for Icarus Precision Grip Modules used with factory slides, which impact fit and function of the holster. We do not guarantee fitment with aftermarket slides or other components.

Grip Module Compatibility (Start Here)

This holster is specifically designed for use with the Icarus Precision A.C.E. 365 "XL" EVO Grip Module. Proper fit and retention depend on this exact configuration.

Icarus Precision A.C.E. 365 "XL" EVO Grip Module

• Only compatible with Icarus A.C.E. 365 "XL" EVO grip module
• Not compatible with any other Icarus Precision grip modules
• Not compatible with AXG or SXG grip modules
• Not compatible with Icarus Air Polymer grip modules
• Not compatible with Icarus 311 grip modules

Light Compatibility & Retention

This is a light-bearing Inside Waistband (IWB) holster designed for use with the following weapon lights:

• Streamlight TLR-7 Sub 1913 (#69402, #1 key)
• Streamlight TLR-7 X Sub USB (#69407, #1 key)
• Streamlight TLR-7 HL-X Sub (#69505, #1 key)
• Compatible with 1913 TLR-7 Sub keys from Henry Holsters & Tactical Development (pistol sits slightly lower)

Important: Retention is based on the weapon-mounted light. The holster will not retain the firearm without the light properly installed.

Fits Sig Sauer P365, P365X, and P365XL with Icarus Precision XL EVO Grip & Streamlight TLR-7 Sub 1913

The holster does not fit the P365 AXG & SXG grip modules.

This Inside Waistband (IWB) Kydex holster is precision-formed for the Sig Sauer P365 series with the Icarus Precision A.C.E. 365 "XL" EVO grip module, paired with the Streamlight TLR-7 Sub 1913, TLR-7 X Sub 1913, or TLR-7 HL-X Sub 1913 version weapon light. For secure fit and reliable retention, the correct 1913 version of the TLR-7 Sub must be mounted to the firearm.

Compatible with:

Sig Sauer Slides from the following models:

P365, P365X, P365XL, P365XL Spectre, Spectre Comp, P365 SAS, P365X RomeoZero, P365XL RomeoZero, and RomeoZero Elite slides

Streamlight part numbers:

TLR-7 Sub 1913 (Part# 69402, #1 key)
TLR-7 X Sub USB (Part# 69407, #1 key)
TLR-7 HL-X Sub (Part# 69505, #1 key)

Icarus Precision A.C.E. 365 "XL" EVO grip module can be found here

Not compatible with:

Any TLR-7 Sub models not using the 1913 rail key

P365 with Icarus AIR Polymer grip modules

Firearms without a mounted weapon light (holster retention is on the light, not the trigger guard or frame)

This holster is designed to work with the factory slide. Any aftermarket slide design variations from the OEM slide dimensions will affect the holster fit and retention.

Important Tip:

Apply removable thread locker to all screws to prevent hardware loosening.

Key Features

Precision-fit retention on the weapon light for secure carry

Vacuum-formed using CAD-based molds and test-fitted with real firearms and lights

Open muzzle design supports threaded barrels or comps

High sight channel for suppressor-height sights

Adjustable cant and ride height with Monoblock or Ultituck belt clips

Optional Modwing with 2 insert sizes to reduce printing and improve concealment

Reinforced gussets to prevent cracking and distribute wing pressure evenly

Red dot ready with full sweat guard and optic cut clearance

Smooth edges for maximum comfort

.080” thermoplastic shell for rugged durability

Compatible with the Phlster Enigma system

Proudly Made in the USA

Complete Your Carry Setup

Complete your concealed carry setup with purpose-built accessories designed for comfort, concealment, and everyday use.

4Bros Holster Wedge — Designed to improve concealment and comfort by helping angle the firearm grip closer to the body while reducing pressure points during IWB carry.

Our Belt Attachment Blog Article explaining the different options can be found here:

4Bros Four Brothers Holsters Inside Waistband Attachments Explained

If you choose the optional ModWing and later want to remove it, you'll need our Replacement Hardware kit which includes (2) 3/8" screws, (2) 1/4" rubber spacers, and (2) 1/4" threaded posts.

Magazine Pouches for these models can be found here:

P365XL IWB Magazine Pouch

P365XL OWB Magazine Pouch

Helpful Info:

Information for the Streamlight TLR-7 X Sub can be found here.

Information for the Streamlight TLR-7 HL-X Sub can be found here.

Our preferred light option for this holster is the Streamlight TLR-7 HL-X Sub USB, which can be purchased from us HERE.

The Holster is compatible with the 1913 TLR-7 Sub Key from Henry Holsters and Tactical Development. The pistol will sit slightly lower in the holster.

The Icarus grip modules can be found HERE

FAQs: 

Will this holster fit the P365 without a light?
No. This holster requires the Streamlight TLR-7 Sub 1913, TLR-7 X Sub, or TLR-7 HL-X Sub to be installed. The holster retention is based entirely on the light, not the gun frame.

How do I know if I have the 1913 version of the TLR-7 Sub?
Check your light’s part number. It must be #69402, #69407, or #69505. These versions include the #1 1913 key, which is essential for proper fit and retention.

Is this holster compatible with the Icarus AIR grip module?
No. It is only compatible with the Icarus A.C.E. 365 XL EVO aluminum grip module, not the AIR Polymer series.

Does it work with the Phlster Enigma?
Yes, this holster is fully compatible with the Phlster OS Enigma system.

Can I use this holster with a compensator or threaded barrel?
Yes. The open-muzzle design accommodates extended barrels and comps without issue.

Is this holster red dot compatible?
Yes. The sweat guard is cut to clear optics like the RomeoZero, Holosun EPS, and others, even those that overhang the slide.

What ride height and cant adjustments are available?
The holster supports adjustable ride height and cant through both Monoblock and Ultituck belt clip options.

• Full Sweat Guard
• Adjustable Retention
• Adjustable Cant
• Profile cut to allow red dot sights
• Open Muzzle for threaded barrels and compensators
• Minimal material and smooth edges
• Made from .080" thick thermoplastic for durability.
• Optional Modwing includes 2 inserts to allow the user to adjust the amount of leverage placed against the inside of the belt to reduce firearm printing
• Proudly Made in the USA

• Monoblock
• 1 Series Gear Clips
• Ultituck
• Soft Loops 
• RCS Overhooks
• Ulticlip

IWB Belt Attachments Explained

Made in America. Founded, located, engineered, manufactured, and shipped from Northern Indiana.

Please review our Four Brothers Holsters Exchange, Return and Refund Policy

Please review our Four Brothers Holsters Terms of Service