Sig Sauer P365-FUSE & TLR-7 Sub Duty & Competition Holster

Sig Sauer P365-FUSE OWB Duty & Competition Holster for Streamlight TLR-7 Sub 1913

This Outside Waistband (OWB) duty and competition Kydex holster is precision molded for the Sig Sauer P365-FUSE equipped with a compatible Streamlight TLR-7 Sub 1913-series weapon light. It is designed for USPSA, 3-Gun, Steel Challenge, range training, and other shooting sports where a durable, adjustable light-bearing holster is required.  This holster is also compatible with the P365-FUSE COMP

The holster is also confirmed to fit a P365-FUSE slide installed on a Mischief Machine Alpha Gen 3 grip module when used with a compatible 1913 Streamlight weapon light.

Required Streamlight Weapon Light

This holster is designed for the following weapon-mounted lights:

• Streamlight TLR-7 Sub or TLR-7 X Sub 1913, Part #69402, using the #1 key
• Streamlight TLR-7 X Sub USB, Part #69407
• Streamlight TLR-7 HL-X Sub, Part #69505

Important: Holster retention is created around the mounted weapon light rather than the pistol alone. The firearm will not retain properly unless a compatible light is correctly installed.

This holster is not compatible with the Streamlight TLR-7 Sub SIG version.

• Streamlight TLR-7 X Sub specifications and compatibility information
• Streamlight TLR-7 HL-X Sub specifications and compatibility information
• Purchase the Streamlight TLR-7 HL-X Sub USB weapon light

Built for Duty, Range, and Competition Use

Each holster is vacuum formed over a precision-machined mold developed from a CAD model of the actual firearm and weapon light. It is formed, trimmed, folded, and finished in-house, then tested with the pistol and light combination to verify fit, function, and retention.

Adjustable retention allows the draw resistance to be tuned for the shooter's preferred balance of security and speed.

Holster Features

• Outside Waistband holster designed for USPSA, 3-Gun, Steel Challenge, range use, and other shooting sports
• May not comply with all IDPA equipment rules; confirm current division requirements before competition
• Includes a Blade-Tech Drop and Offset belt attachment
• Adjustable holster retention
• Precision molded for the Sig Sauer P365-FUSE with compatible Streamlight 1913 weapon lights
• Confirmed fit with a P365-FUSE slide on the Mischief Machine Alpha Gen 3 grip module
• Profile cut to accommodate most pistol-mounted red dot sights
• Open muzzle accommodates threaded barrels and compensators
• Minimal material and smooth edges reduce unnecessary bulk
• Constructed from durable .093-inch thermoplastic
• Proudly made in the USA

Related P365-FUSE Products and Resources

Explore available Sig Sauer P365-FUSE Kydex holsters.

Compare mounting options in the duty and competition holster attachment guide.

Pair the holster with a P365-FUSE IWB magazine carrier or a P365-FUSE OWB magazine carrier.

Review available finishes in the Kydex holster color and pattern guide.

Frequently Asked Questions

Which Streamlight lights fit this P365-FUSE holster?

It fits the Streamlight TLR-7 Sub or TLR-7 X Sub 1913, Part #69402, with the #1 key; the TLR-7 X Sub USB, Part #69407; and the TLR-7 HL-X Sub, Part #69505.

Will the holster work without the weapon light installed?

No. The holster retains the firearm through the mounted weapon light, so a compatible light must be correctly installed.

Does the Streamlight TLR-7 Sub SIG version fit?

No. This holster is designed for the 1913 versions of the TLR-7 Sub and is not compatible with the SIG-specific model.

Does this holster fit the Mischief Machine Alpha Gen 3 grip module?

Yes. Fit has been confirmed with a P365-FUSE slide installed on the Mischief Machine Alpha Gen 3 grip module and a compatible 1913 TLR-7 Sub weapon light.

Is this holster compatible with red dot sights?

Yes. The holster profile is cut to accommodate most pistol-mounted red dot sights.

Can this holster be used for USPSA or Steel Challenge?

Yes. It is designed for USPSA, Steel Challenge, 3-Gun, and similar shooting sports. Competitors should verify current equipment and division rules before use.

Is this holster IDPA legal?

Not necessarily. The Blade-Tech Drop and Offset attachment or overall configuration may not meet every IDPA division requirement. Confirm the current rules before competing.

Does the holster accommodate threaded barrels or compensators?

Yes. The open muzzle design accommodates most threaded barrels and compensators.

How should the holster hardware be maintained?

Inspect the hardware regularly and apply removable thread locker to each screw after setting the preferred retention and belt attachment position. This helps prevent hardware from loosening during use.

• Outside Waistband Holster specifically designed for USPSA, 3-Gun, Steel Challenge, and other competition shooting sports (May not be IDPA Legal)
• Holster purchase includes one belt attachment, based on your selected option
• Holster Retention is easily adjustable
• Molded with .093" thick thermoplastic for durability
• Profile cut to allow red dot sights
• Open Muzzle for threaded barrels and compensators
• Minimal material and smooth edges
• Proudly Made in the USA

• Duty Drop
• Duty Drop & Thigh Strap
• BOSS Hanger
• Modular Holster Adapter

Duty & Competition Holster Attachments Explained

Made in America. Founded, located, engineered, manufactured, and shipped from Northern Indiana.

Please review our Four Brothers Holsters Exchange, Return and Refund Policy

Please review our Four Brothers Holsters Terms of Service