4Bros Molle Adapter Revision 3

Revision 3 MOLLE Adapter for Taser & Blade-Tech Holsters

The Revision 3 MOLLE Adapter was developed to provide a cost-effective, durable, and standardized solution for mounting compatible Taser and Blade-Tech holsters to MOLLE-equipped load-bearing vests. This single, user-installed kit converts multiple legacy and current holsters using a common hardware setup, simplifying deployment across duty gear.

Compatible Holsters

This adapter is designed for holsters and carriers that use a 10-32 screw pattern or standard Blade-Tech bolt pattern, including:

• Four Brothers Outside Waistband Holsters
• Blackhawk Taser X26, X2, and Omnivore holsters
• Blade-Tech Taser X26, Taser 7, and Taser 10 holsters
• New Blackhawk Taser 7 and Taser 10 holsters
• Most standard Blade-Tech bolt pattern holsters and carriers

Key Features

• Mountable to all Four Brothers Outside Waistband Holsters 
• Straight MOLLE adapter plate compatible with Blackhawk and Blade-Tech attachment patterns
• Tested extensively with 4BROS, Blackhawk, and Blade-Tech Taser holsters
• Supports cant or angled mounting when used with the Blade-Tech Taser 7 holster
• Fixed vertical orientation when used with standard bolt patterns
• Adapter plate strength tested beyond 100 lbs of pull force, with actual failure occurring around 300 lbs
• User-installed system with included common mounting hardware for fast setup

Installation & Instructions

Installation instructions are provided for each supported holster configuration. Reviewing the appropriate guide before installation is strongly recommended to confirm compatibility and mounting orientation.

• Blade-Tech X26 & Taser 7 MOLLE Adapter Installation Instructions
• Blackhawk Taser 7 MOLLE Adapter Installation Instructions
• Standard Blade-Tech Bolt Pattern MOLLE Adapter Installation Instructions

Video Instructions: 4BRos Molle Adapter Install Video

For best results, we strongly recommend applying Loctite 242 or Vibra-Tite 121 thread locker to all screws during final installation.

Agency & Department Orders

Law enforcement and military departments are eligible for Net 15-day payment terms. Purchase orders must be submitted from an official department email address, and the shipping address must match the department location. Bulk purchase quotes are available upon request.

Contact us to request a quote or initiate a department order.

Important Notice

By purchasing this product, you assume full responsibility for proper installation. Four Brothers, Inc. is not responsible for damage or failure resulting from incorrect installation.

Frequently Asked Questions

Will this MOLLE adapter fit my holster?

The adapter is compatible with all Four Brothers OWB Holsters and most Blackhawk and Blade-Tech holsters that use a 10-32 screw pattern or standard Blade-Tech bolt pattern. Reviewing the installation instructions for your specific holster is the best way to confirm compatibility.

Does the adapter allow adjustable cant or angle?

Cant or angled mounting is supported only when used with the Blade-Tech Taser 7 holster. Standard bolt pattern holsters will mount in a fixed vertical orientation.

How durable is the adapter?

The adapter plate has been pull-tested to more than 100 pounds of force, with actual failure occurring at approximately 300 pounds, exceeding standard validation requirements.

Is a thread locker required?

Thread locker is not included but is strongly recommended to ensure long-term retention and duty reliability.

Please review our Four Brothers Holsters Exchange, Return and Refund Policy

Made in America. Founded, located, engineered, manufactured, and shipped from Northern Indiana.