4Bros Molle Adapter Revision 3



Our goal in developing the third revision of our Molle Adapter was simple; offer a low cost, effective and solid mount to convert the old X26, X2 and Omnivore holsters, new Blade-Tech X26 and Taser 7, New Blackhawk Taser 7 Holster that uses 10-32 screws and most standard Blade-Tech bolt pattern holsters and carriers to a Load Bearing Vest with one common kit. We have achieved that by creating a user installed system that includes the common hardware needed for quick, simple installation.
Straight Molle adapter for standard Blackhawk and Blade-Tech holster attachment pattern. Tested on Blackhawk Taser X26, X2 and Omnivore as well as Blade-Tech X26 and Taser 7 Holsters. May fit other Blackhawk or Blade-Tech Holsters. Installation instructions are included in packaging.
Our goal in developing the third revision of our Molle Adapter was simple; offer a low cost, effective and solid mount to convert the old X26, X2 and Omnivore holsters, new Blade-Tech X26 and Taser 7, New Blackhawk Taser 7 Holster that uses 10-32 screws and most standard Blade-Tech bolt pattern holsters and carriers to a Load Bearing Vest with one common kit. We have achieved that by creating a user installed system that includes the common hardware needed for quick, simple installation.
Straight Molle adapter for standard Blackhawk and Blade-Tech holster attachment pattern. Tested on Blackhawk Taser X26, X2 and Omnivore as well as Blade-Tech X26 and Taser 7 Holsters. May fit other Blackhawk or Blade-Tech Holsters. Installation instructions are included in packaging.
Straight Molle adapter for standard Blackhawk and Blade-Tech holster attachment pattern. Tested on Blackhawk Taser X26, X2 and Omnivore as well as Blade-Tech X26 and Taser 7 Holsters. May fit other Blackhawk or Blade-Tech Holsters. Installation instructions are included in packaging.
.07 Tube Vibra-Tite 121 Threadlocker for Molle Adapter
We are transitioning to the third revision of our Molle Adapter. While we make the changes, we are going to leave the old information available for a limited time to allow recent purchases to access the original instructions. Please see the Revision 2 listing details below for purchases made before January 30th. 
Revision 3 Details, for purchases made after January 30th 2022. 
Our goal in developing the third revision of our Molle Adapter was simple; offer a low cost, effective and solid mount to convert the old X26, X2 and Omnivore holsters, new Blade-Tech X26 and Taser 7, New Blackhawk Taser 7 Holster that uses 10-32 screws and most standard Blade-Tech bolt pattern holsters and carriers to a Load Bearing Vest with one common kit. We have achieved that by creating a user installed system that includes the common hardware needed for quick, simple installation. 
Features:
  • Straight Molle adapter for standard Blackhawk and Blade-Tech holster attachment pattern 
  • Tested on Blackhawk Taser X26, X2 and Omnivore Holsters.  
  • Tested on Blade-Tech X26 and Taser 7 Holsters.
  • May fit other Blackhawk or Blade-Tech Holsters
  • Adapter will not allow holster cant or angle on Molle attachment for standard bolt patterns
  • Adapter will allow holster cant or angle on Molle attachment for the Blade-Tech Taser 7 Holster
  • Adapter plate strength pull tested to withstand an excess of 100 pound of force. (Actual failure was somewhere around 300 pounds, which exceeded our validation capabilities.) 

We do support law enforcement and military departments with Net 15 day terms, payable by check. Purchase Orders must be submitted from a department email and shipping address must match the department location exactly.  A quote for bulk purchases is available if necessary.  Please contact us to receive a quote and initiate the order. 

Installation instruction links are listed below. If you have questions regarding the compatibility of your holster and our adapter, we suggest visiting each of the instruction links below for quick answers. If you do not find the information you need, please feel free to reach out through the contact us section of the website. We will answer your questions as quickly as possible.  
We STRONGLY suggest using Loctite 242 or Vibra-Tite 121 threadlocker on all screws during the final steps of the installation. 
Terms and conditions: By purchasing this product, you take full responsibility for correct installation of the adapter to your gear. We will not be responsible for incorrect installation. 
Revision 2  Details, for purchases made before January 30th, 2022:
Our goal in developing this adapter was simple; offer a low cost, effective and solid mount to convert the X26, X2 and Omnivore holsters to a Load Bearing Vest. We have also used our adapter on the X26 and Taser 7 holsters. 
  • Straight Molle adapter for standard Blackhawk and Blade-Tech holster attachment pattern 
  • Tested on Blackhawk Taser X26, X2 and Omnivore Holsters.  
  • Tested on Blade-Tech X26 and Taser 7 Holsters.
  • May fit other Blackhawk or Blade-Tech Holsters
  • Assembled with thread locker to prevent lost screws in the field.
  • Adapter will not allow holster cant or angle on Molle attachment. 
  • Installation instructions are included in packaging and can also be found online in our blog section by following the link below
  • This adapter will not fit the Blackhawk holsters that use 10-32 screws for attachment. We have a special Molle Adapter available for that application. 

Molle Adapter Installations Instructions

Blade-Tech X26 and Taser 7 Holster Molle Adapter Instructions 

Purchase includes free installation if required, customer is responsible for current holster delivery to our facility. 

Terms and conditions: By purchasing this product, you take full responsibility for correct installation of the adapter to your gear. We will not be responsible for incorrect installation. 

Please email with questions. If the item shows out of stock, we are waiting on supplies for assembly. Please feel free to email us to request an order with the understanding that we will ship when supplies are replenished.

 

4Bros Molle Adapter Revision 3

Regular price $45.00
Shipping calculated at checkout.